ams -03-15t technical specifications american microsemiconductor inc. page 1 of 1 1 33 kings road, madison, nj 07940 as/en/jisq/ 9100:2009 rev c and iso 9001:2008 certificate no: 45325 t el. 973 - 377 - 9566 fax . 973 - 377 - 3078 http://www.americanmicrosemiconductor.com f eatures a bsolute m aximum r atings v rrm repeating peak reverse voltage (kv): 15 t jmax max. junction temp. (c) : 125 t stg storage temp. (c) : - 40 to +125 i o avg. forward current (ma) : 3 00 i fsm forward surge current (a) : 3 0 e lectrical c haracteristics i r1 normal temp. reverse current ( a) @ v r =v rrm , t amb =25c: 5 .0 max i r2 high temp. reverse current ( a) @ v r =v rrm , t amb =100c : 50 max v f forward voltage drop ( v) @ i f =3 00ma: 24.0 t rr reverse recovery time ( ns) @ i f =50ma, i r =100m a: 100 t est c onditions hig h temp. reverse voltage @ 1000 h rs.: v rm = v rrm , f=50hz, t amb =100c half sine voltage with f=50hz applied, t amb =100c high temp. storage @ 1000 hrs.: t amb =130 2c soldering resistance heat test: solder trough temp.: 350 10c, dip time: 3.5s 0.5s high pressure smoke test @ 10 hrs.: 120c, 2 x 10 5 pa insulation resistance test (1000m ): between the center of the body and terminal (see fig. 1) insulation st rength test @ 10 kv: 1 min. between center of the body and terminal. (fig.1 ) lead bend test: force 10 n to the lead, bent it to pos. and neg. 90 lead pull test: force 70 n of axial to the lead for 1 min. insulation resistance test condition: measure between a and b by using a dc 500v insulation resistance tester insulation strength test condition: apply half sine wave voltage with 10kv wave height between a and b in insulation liquid ? high overload surge capacity ? durable epoxy resin package to order with quick disconnect terminals, use the partnum - term
|
